Product Paramenters
Product Structure
The self-pressurized liquid nitrogen tank is made of high-quality stainless steel, and the container is equipped with a pressure-increasing system, which can generate pressure and continuously discharge liquid. |
The control system of the container is mainly composed of: liquid valve; booster valve or pressure building valve; vent valve, safety valve; liquid level gauge; pressure gauge; independent braked casters. |
|
|
Details Images
Inlet Liquid: When filling liquid from the inlet / drain valve and filling the container, please first open the vent valve, connect the infusion metal hose to the inlet / drain valve, open the inlet / drain valve, then you can start from The liquid medium is added to the inlet / drain valve. After the liquid is filled, the inlet / drain valve is closed.
Liquid level indication: By observing the yellow indicator ring in the transparent display, you can directly read the change of the liquid level
Storage: When you use this container to store liquid medium, please close the inlet / drain valve and pressurization valve, you must open the vent valve
Transportation: When you use this container to transport liquid medium, the opening and closing state of each valve should be the same as that during storage, and please fix the wheels under the container seat ring, and use the rope to fix the container to the car reliably.
Drain Liquid: Close the vent valve, open the booster valve, observe the pressure gauge, and when the pressure rises to 0.05MPa (0.5kg / cm2), open the drainage valve to allow continuous infusion.